POLYSEAL PS PG is a two component pourable, self leveling polysulphide resin based joint sealant. POLYSEAL PS PG is specifically designed to be used as a watertight seal for moderate movement and control joints in horizontal areas. It is based on a liquid polysulphide polymer which when mixed with the hardener, cures to form a tough, flexible and non staining rubber like seal. POLYSEAL PS PG has excellent adhesion to concrete, stone, metals and other common building surfaces. The cured sealant has good resistance to most environmental chemicals & resists deterioration on prolonged exposure to UV.
POLYSEAL PS PG is suitable for use in horizontal areas with a maximum slope gradient of 10%. The sealant has a Movement Accomodation Factor (MAF) of ±25%.
Highly resilient with excellent recovery characteristics
Provides permanent and uniform watertight seal
Excellent resistance to fatigue and stays flexible throughout its service life–won’t become brittle, caulk or crack due to ultra violet exposure
Prevents uncontrolled cracking by allowing expansion and contraction during temperature
Excellent adhesion to most common building substrates
Good resistance to ageing. Retains joint soundness once cured
Resistance against mild chemicals, hydrocarbon fuels, sea water
Non-toxic. Can be used in potable water applications, swimming pools
Sealing of movement and control joints in:
Structural floor joints
Airport runways and apron pavements
Garages & workshops
Swimming pool floors